V 1.3A

 

 
SPECIFICATION
 

Processor

• One Socket 478 supports the Intel® Pentium® 4 processor with Hyper Threading Technology ready, support 800/533/400MHz FSB

Memory

• Two DDR 184-pin 2.5V DIMM Sockets (DDR266/333/400)
• Maximum: 2GB

Chipset

• HT1683 Northbridge and HT1563 Southbridge Chipset
• Supports six USB 2.0 ports
• Supports four 32-bits PCI slots of arbitration and decoding for all integrated functions and LPC bus.
• Audio – C-Media CMI9738 AC’97 Codec(4 Channel)
• 8x AGP Support
• LAN – Realtek 10/100BaseT LAN onboard

System BIOS

• AMI 2Mb Firmware Hub
• Supports Plug and Play 1.0A, APM 1.2, Multi Boot, DMI
• Support ACPI revision 1.0 specification

Modem

Optional 56K V.90 CNR Modem

Expansion Slots

• 4 PCI slots, 1 AGP slot (8x), 1 CNR slot


I/O Interface

Back Panel I/O Ports
• PS/2 keyboard and mouse connectors
• Four USB2.0 Ports and a LAN connector
• One EPP/ECP mode parallel port
• One 16550 high-speed serial I/O port
• Audio ports (Mic, Audio-in, Audio-out)

Onboard ports, headers and others
•Two IDE connectors supports four IDE devices (Ultra DMA 66/100/133)
• One FDD connector supports 360K~2.88M Byte, 3 Mode FDDs or LS120
• P4 ATX Power Supply Connector (4-Pin 12V power connector require)
• USB Card Reader Connector (share one USB port from back panel)
• IrDA header
• Internal PC speaker header
• CD ROM/DVD Audio Input header
• 2 Extra USB2.0 onboard header
• HDD LED, Reset Switch, Suspend LED, Power Switch headers
• CPU and System Fan headers

Special Features

• Supports Wake on LAN, Wake on Modem, Wake on Alarm, Interrupt Wake-Up from Keyboard/Mouse,

Form Factor & Layers

• ATX (305mm*195mm)

 
| Home | Where to Buy | News | Products | About Us | Support | Downloads | Career | Contact |